DAIROOL

Small-Batch Butter Production Line for Dairy Plants

Sweet Cream Butter · Cultured Butter · Modular Production

Designed for dairy plants that want to add butter production without investing in oversized continuous equipment. This small-batch butter production line integrates cream separation, pasteurization, ripening, batch churning, working and packaging. The system is configured according to daily milk supply, milk fat content, target butter output and operating schedule, helping control initial investment while allowing future expansion.

Reference Dairy Plant5,000 L/day Milk Basis
Butter Production Mode100–200 L Batch Churning
Target Butter Output20–70 kg/day

KEY PROCESS

Key Process

The butter production process starts with hygienic cream separation, followed by controlled pasteurization and ripening before batch churning and working. Each stage is configured according to the target butter type, milk fat content and planned production capacity.

Cream Separation

Raw milk is hygienically separated into cream and skim milk. The cream enters the butter production route, while the skim milk can be retained for standardization or other dairy products instead of being treated as waste.

Cream Pasteurization & Ripening

Separated cream is pasteurized and then held under controlled temperature conditions before churning. Ripening helps establish the required fat crystallization and, for cultured butter, supports the development of the target flavor profile.

Batch Churning & Working

Prepared cream is churned in controlled batches until butter grains form. The butter is then worked to achieve the required moisture distribution, texture and consistency before forming and packaging.

OVERVIEW

Production Line Overview

Reference configuration for dairy plants adding small-batch butter production to an existing or multi-product milk processing operation. Capacity, batch size and equipment selection are matched to daily milk supply, milk fat content, target butter output and operating schedule.

Production Capacity

Reference Dairy Plant5,000 L/day Milk Basis — Reference basis
Butter Production Mode100–200 L Batch Churning — Small-batch operation
Target Butter Output20–70 kg/day — Scenario-based
Capacity BasisMilk Supply + Fat Content — Project-specific
Production Capacity
Reference Dairy Plant5,000 L/day Milk Basis — Reference basis
Butter Production Mode100–200 L Batch Churning — Small-batch operation
Target Butter Output20–70 kg/day — Scenario-based
Capacity BasisMilk Supply + Fat Content — Project-specific

Operating Plan

Production Schedule1 Shift / Custom — Project-based
Production ModeBatch Processing — Small-batch operation
Pasteurization Capacity1,500–2,500 L/h — Reference range
Project BasisProduct / Capacity / Schedule — Final configuration confirmed before order
Operating Plan
Production Schedule1 Shift / Custom — Project-based
Production ModeBatch Processing — Small-batch operation
Pasteurization Capacity1,500–2,500 L/h — Reference range
Project BasisProduct / Capacity / Schedule — Final configuration confirmed before order

Product & Process

Target ProductsSweet Cream / Cultured Butter — Product-dependent
Key ProcessSeparation / Ripening / Churning — Core butter route
Process RouteCream → Butter — Batch processing
By-productsSkim Milk + Buttermilk — Recovered for further use where applicable
Product & Process
Target ProductsSweet Cream / Cultured Butter — Product-dependent
Key ProcessSeparation / Ripening / Churning — Core butter route
Process RouteCream → Butter — Batch processing
By-productsSkim Milk + Buttermilk — Recovered for further use where applicable

Utilities & Control

Line ConfigurationShared Front-End + Butter Line — Modular setup
UtilitiesRefrigeration / Hot Water / Air — Site-dependent
Control SystemProject-Specific — Automation level confirmed by project
Cleaning SupportSemi-Automatic CIP — Scope confirmed in technical agreement
Utilities & Control
Line ConfigurationShared Front-End + Butter Line — Modular setup
UtilitiesRefrigeration / Hot Water / Air — Site-dependent
Control SystemProject-Specific — Automation level confirmed by project
Cleaning SupportSemi-Automatic CIP — Scope confirmed in technical agreement

CORE PERFORMANCE

Core Performance

Production planning is based on daily milk supply, milk fat content, target butter output and batch size. The reference configuration uses small-batch churning to match actual butter demand while avoiding oversized continuous equipment.

Right-Sized Butter Production

20–70 kg/day · 100–200 L Batch Churning→
Designed for dairy plants that want to add butter production without committing to oversized continuous equipment. Only the required share of daily milk is allocated to the butter route, while the remaining milk can continue to other dairy products. Capacity can be expanded as butter demand grows.

Flexible Milk Allocation

Only part of the daily milk supply needs to be routed to butter production. Milk allocation can be adjusted according to butter demand, milk fat content and the plant’s overall product mix.

Project-Based Milk Share

Batch Churning

Small-batch churning supports flexible production of sweet cream or cultured butter without requiring high-volume continuous butter-making equipment.

100–200 L per Batch

Expandable Capacity

The butter module can be expanded through larger or additional churning capacity, upgraded packaging and higher automation as sales volume increases.

Scale with Market Demand

PROCESS FLOW

Process Flow

The butter production line follows a complete process from milk reception and cream separation to pasteurization, ripening, batch churning, working, forming and packaging. The process can be adjusted according to butter type, milk fat content, daily production target and available utilities.

Key Process Stages

Process Type
Small-Batch Butter Production
Reference Milk Supply
5,000 L/day
Butter Output
20–70 kg/day
Batch Churner Capacity
100–200 L/batch
Main Process Route
Separation → Pasteurization → Ripening → Churning → Working → Packaging
By-product Handling
Skim Milk + Buttermilk Collection

CORE EQUIPMENT

Core Equipment

The core butter line includes cream separation, controlled cream pasteurization and ripening, batch churning and downstream working/forming. Equipment capacity is selected according to target butter type, milk fat content and planned daily output.

Cream Separator

Cream Separation · Skim Milk Recovery

Separates raw milk into cream and skim milk for efficient butter production while retaining skim milk for further dairy processing where applicable.

Cream Pasteurization & Ripening System

Controlled Heating · Cooling · Ripening

Provides controlled cream heat treatment and ripening conditions before churning, supporting process stability, fat crystallization and cultured butter production.

Batch Butter Churner

100–200 L per Batch

Churns prepared cream in controlled batches until butter grains form and separate from buttermilk, matching small-batch production requirements.

Butter Working & Forming Unit

Texture Adjustment · Forming

Works the butter to improve moisture distribution and consistency before forming or transfer to the selected packaging stage.

CONFIGURATION

Line Configuration & Options

The reference butter line combines cream separation, controlled pasteurization and ripening, batch churning, working and downstream handling. Equipment capacity, optional modules and automation level can be configured according to butter type, target output, site utilities and future expansion plans.

Standard Line

Reference configuration for small-batch butter production
  • Cream Separation: Included — Cream / skim milk separation
  • Cream Pasteurization & Ripening: Included — Controlled heat treatment and ripening
  • Batch Butter Churner: 100–200 L — Reference batch size
  • Butter Working & Forming: Included — Downstream butter handling
  • Semi-Automatic CIP: Included — Cleaning scope project-specific

Optional Modules

Selected according to product range and production requirements
  • Cultured Butter Module: Optional — For cultured butter production
  • Automatic Packaging: Optional — Block / retail packaging
  • Larger Churner Capacity: Optional — For higher butter output
  • Buttermilk Collection: Optional — Collection for further use
  • Skim Milk Integration: Optional — Connection to other dairy processing

Automation & Project Setup

Configured according to site conditions and operating requirements
  • Control System: Project-Specific — Confirmed during engineering
  • HMI Language: English / Russian — Operator interface
  • Power Supply: Project-Specific — Confirm before order
  • Piping Layout: Project-Specific — Based on plant layout
  • Utility Connection: Project-Specific — Water / refrigeration / hot water
  • Capacity Matching: Custom — Based on milk supply and butter demand

CASE STUDIES

Related Case Studies

KNOWLEDGE

Related Articles

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

FAQ

Frequently Asked Questions

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Q&A

Questions & Answers

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Request Configuration & Quote