DAIROOL

Dairy Farm Milk Cooling & Storage System with CIP

Rapid Milk Cooling · Smart PLC Control · Automatic CIP

This page uses a 4 T/h dairy farm milk cooling and storage system as a reference configuration. Final capacity, storage volume, CIP scope and automation level are customized according to herd size, daily milk volume, milking schedule and site conditions.

Processing Capacity4 T/h
Cooling Target37°C → ≤2°C
Automatic CIPClosed-Loop Cleaning
Smart ControlSiemens PLC + HMI
Refrigeration SystemDual-Unit Cooling

KEY PROCESS

Key Process

The system connects post-milking milk reception, rapid cooling, refrigerated storage and automatic CIP cleaning into one integrated workflow, helping maintain milk quality, stable operation and hygienic handling from milking to storage.

Milk Reception & Buffering

Fresh milk from the milking system enters a sanitary buffer tank to stabilize milk flow before continuous transfer to the cooling section, helping avoid frequent start-stop operation of downstream equipment.

Rapid Milk Cooling

Milk is transferred through sanitary piping and rapidly cooled through a plate heat exchanger using chilled water before entering storage, reducing the time fresh milk remains at elevated temperature.

Cold Milk Storage

Cooled milk is transferred to insulated bulk storage silos with agitation, temperature monitoring and level control for stable refrigerated holding before collection or further processing.

Automatic CIP Cleaning

After milk transfer, tanks and connected pipelines can be cleaned through an automatic closed-loop CIP system with programmable cleaning sequences for water, acid, alkali, time and temperature.

OVERVIEW

Production Line Overview

Reference configuration for large dairy farms, combining 4 T/h rapid milk cooling, 24,000 L insulated storage and automatic CIP cleaning. Final cooling capacity, storage volume and automation level can be customized according to herd size, daily milk volume, milking schedule and site conditions.

Farm & Capacity

Reference Herd Size800 cows — Customizable
Daily Milk Volume24 t/day — Reference
Processing Capacity4 T/h — Rapid cooling line
Milking Schedule2 batches/day — Reference operation
Cooling Target37°C → ≤2°C — Rapid milk cooling
Automatic CIPClosed-Loop Cleaning — Automated tank & pipeline cleaning
Smart ControlSiemens PLC + HMI — Integrated milk reception & CIP control
Refrigeration SystemDual-Unit Cooling — Redundant chilled-water system
Milk Storage Capacity24,000 L Reference — nsulated chilled storage
Farm & Capacity
Reference Herd Size800 cows — Customizable
Daily Milk Volume24 t/day — Reference
Processing Capacity4 T/h — Rapid cooling line
Milking Schedule2 batches/day — Reference operation
Cooling Target37°C → ≤2°C — Rapid milk cooling
Automatic CIPClosed-Loop Cleaning — Automated tank & pipeline cleaning
Smart ControlSiemens PLC + HMI — Integrated milk reception & CIP control
Refrigeration SystemDual-Unit Cooling — Redundant chilled-water system
Milk Storage Capacity24,000 L Reference — nsulated chilled storage

Cooling & Storage

Inlet Milk TemperatureApprox. 37°C — After milking
Cooling Target≤2°C — Rapid cooling
Storage Capacity24,000 L — 2 × 12,000 L Vertical Silos, — Vertical silo
Insulation100 mm PU — Polyurethane
Temperature Rise≤2°C / 24 h — Reference performance
Cooling & Storage
Inlet Milk TemperatureApprox. 37°C — After milking
Cooling Target≤2°C — Rapid cooling
Storage Capacity24,000 L — 2 × 12,000 L Vertical Silos, — Vertical silo
Insulation100 mm PU — Polyurethane
Temperature Rise≤2°C / 24 h — Reference performance

CIP & Control

CIP Tank800 L — SUS304
Cleaning ModeAutomatic — Closed-loop CIP
Cleaning CyclePre-rinse / Alkali / Acid / Final rinse — One-touch sequence
Control SystemSiemens PLC — Touchscreen control
InterfaceChinese / Russian — HMI
Remote ServiceAvailable — Remote monitoring
CIP & Control
CIP Tank800 L — SUS304
Cleaning ModeAutomatic — Closed-loop CIP
Cleaning CyclePre-rinse / Alkali / Acid / Final rinse — One-touch sequence
Control SystemSiemens PLC — Touchscreen control
InterfaceChinese / Russian — HMI
Remote ServiceAvailable — Remote monitoring

CORE PERFORMANCE

Core Performance

This system integrates rapid milk cooling, insulated bulk storage and automatic CIP cleaning into one coordinated post-milking process. Key engineering features focus on cooling stability, storage reliability, hygienic handling and automated cleaning.

Integrated Post-Milking System

Cooling · Storage · CIP→
Rapid cooling, insulated milk storage and automatic CIP are engineered as one coordinated system to support stable milk quality, hygienic handling and reliable daily operation from milking to storage.Final system configuration should be confirmed according to herd size, daily milk volume, milking schedule and site utilities.

Load-Matched Refrigeration

Dual refrigeration units adjust cooling output to changing milk loads while maintaining stable chilled-water conditions.

25–100% Staged Control

Smart Control & Safety

Siemens PLC coordinates milk reception, cooling, storage and CIP with real-time monitoring and automatic fault protection.

PLC · Sensors · Safety Interlocks

Programmable CIP Cleaning

Automatic closed-loop cleaning controls water, acid/alkali, time and temperature without dismantling process pipelines.

Closed-Loop · No Disassembly

PROCESS FLOW

Process Flow

The system follows a closed post-milking workflow from fresh milk reception and rapid cooling to refrigerated storage and automatic CIP cleaning.

Key Process Stages

01
Milk Reception & Buffering
02
Rapid Milk Cooling
03
Cold Milk Storage
04
Automatic CIP Cleaning

Reference workflow for the 4 T/h system. Milk is received and buffered, rapidly cooled through staged plate heat exchange, transferred to insulated storage, and connected tanks and pipelines are cleaned through automatic CIP. Final configuration is customized to actual farm conditions.

CORE EQUIPMENT

Core Equipment

The core system integrates milk reception and buffering, rapid cooling, insulated bulk milk storage and automatic CIP cleaning into one coordinated post-milking handling solution.

Milk Reception & Buffering Module

800 L Buffer Tank · Milk Transfer Pump

Receives fresh milk from the milking system, stabilizes milk flow and transfers it continuously to the rapid cooling section.

Rapid Cooling Module

4 T/h · Plate Heat Exchanger · Chilled-Water System

Provides rapid post-milking cooling through sanitary milk transfer, plate heat exchange and chilled-water circulation before milk enters refrigerated storage.

Bulk Milk Storage Module

2 × 12,000 L Vertical Silos · Total 24,000 L

Provides insulated refrigerated storage with agitation, temperature monitoring and level detection for cooled milk before collection or further processing.

Automatic CIP Module

800 L CIP Tank · Pumps · Distribution System

Provides programmable cleaning for tanks and connected pipelines through controlled circulation routes and automatic cleaning sequences.

CONFIGURATION

Line Configuration & Options

The reference system integrates milk reception and buffering, rapid cooling, insulated bulk milk storage and automatic CIP cleaning. Cooling capacity, storage volume, automation level and utility configuration can be customized according to herd size, milking schedule and site conditions.

Standard Line

Reference configuration for post-milking milk handling
  • Milk Buffer Tank: 800 L — Milk reception
  • Rapid Cooling System: 4 T/h — Plate heat exchanger
  • Milk Storage Silos: 2 × 12,000 L — Total 24,000 L
  • Automatic CIP: 800 L — Tank & pipeline cleaning
  • Control System: Siemens PLC — Centralized control

Optional Modules

Selected according to site utilities and operating requirements
  • Well-Water Pre-Cooling: Optional — Reduce refrigeration load
  • CIP Chemical Recovery: Optional — Acid / alkali recovery
  • Heat Recovery: Optional — Condenser heat utilization
  • IoT Monitoring: Optional — Remote data access

Automation & Project Setup

Configured according to farm operation and site conditions
  • PLC Control: Siemens — Process coordination
  • HMI Language: Chinese / Russian — Operator interface
  • Remote Service: Available — Monitoring & support
  • Power Supply: Project-specific — Confirm before order
  • Piping Layout: Project-specific — Based on site
  • Capacity Matching: Custom — By herd size & milk volume

CASE STUDIES

Related Case Studies

KNOWLEDGE

Related Articles

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

Knowledge article pending

FAQ

Frequently Asked Questions

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Q&A

Questions & Answers

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Content pending

Request Configuration & Quote