
FAQ
FAQ
FAQ
Frequently Asked Questions
How should the cold chain be configured for pasteurized milk and yoghurt?
Pasteurized milk and yoghurt should be cooled promptly after heat treatment or fermentation and kept within the required refrigerated temperature range during storage and transportation. The exact temperature and cold-chain configuration depend on the product type, packaging and required shelf life.
Do different dairy products require separate filling systems?
Not always. Some products can share the same filling system if the packaging format, product viscosity and hygiene requirements are compatible. However, pasteurized milk, UHT milk, drinking yoghurt and more viscous fermented products may require different filling and packaging technologies.
What equipment is typically included in a liquid dairy production line?
A typical line may include a milk reception system, storage tanks, separator and standardization system, homogenizer, pasteurizer or other heat-treatment system, mixing and buffer tanks, fermentation tanks when required, filling equipment, CIP cleaning system and refrigeration equipment. The final equipment list depends on the product and required capacity.
Which processing stages can be shared between different liquid dairy products?
Milk reception, filtration, standardization, homogenization and some heat-treatment stages can often be shared between several liquid dairy products. After these common stages, the product can be directed to dedicated modules for blending, fermentation, UHT treatment, cooling or filling according to the final product.
How do I choose the right capacity for a liquid dairy processing line?
Line capacity should be selected according to daily milk supply, target products, batch size, number of working hours, packaging requirements and future expansion plans. The capacities of individual processing sections should also be balanced to avoid bottlenecks or unnecessary investment.
What is the difference between a pasteurized milk line and a UHT milk line?
A pasteurized milk line normally uses pasteurization, cooling and hygienic filling, and the finished product usually requires refrigerated storage and distribution. A UHT line uses ultra-high-temperature treatment together with aseptic filling, allowing the unopened product to be stored at ambient temperature. The heat-treatment and filling systems are therefore different.
Can one dairy processing system produce multiple dairy products?
Yes. One dairy processing system can share common stages such as milk reception, standardization, homogenization and part of the heat treatment process, then direct the product to dedicated modules for pasteurized milk, dairy drinks, yoghurt, fermented dairy products and cream. The final configuration depends on the product range, capacity, packaging format and process requirements.
Can DAIROOL design the complete cheese plant layout?
Yes. DAIROOL can develop a preliminary cheese plant layout based on your target products, production capacity, available building dimensions and process requirements. The layout can coordinate process flow, equipment placement, ripening areas, CIP, utilities, personnel movement and material flow to support practical plant implementation.
Do I need a separate ripening room for cheese production?
It depends on the cheese type. Fresh cheese usually does not require long-term ripening, while semi-hard and hard cheeses normally require dedicated ripening areas with controlled temperature, humidity and storage time. The number and size of ripening rooms should be planned according to product type, production volume and ripening cycle.
How much factory space is needed for a cheese plant?
The required factory area depends on daily milk volume, cheese varieties, batch size, processing equipment, ripening rooms, packaging areas, cold storage, CIP, utilities and internal material flow. Hard and aged cheese production normally requires more space because of ripening and storage requirements. Factory size should therefore be determined from the complete process and production plan rather than milk volume alone.
What equipment is typically required for a cheese production line?
A typical cheese production line may include milk reception and storage, pasteurization, cheese vats, curd cutting and whey drainage equipment, forming, pressing, brining, ripening, packaging and CIP systems. Pasta Filata production may also require dedicated acidification, hot-water cooking and stretching equipment.
Can the line handle both regular production and small batches?
Yes. The line can be designed with a main production system for regular daily output and smaller batch equipment or dedicated modules for specialty cheeses, recipe trials or new product development. This allows the plant to maintain stable production while keeping flexibility for smaller-volume products.
